Product Information

Convert, isolate, split, boost, and step down process signals so field instruments can interface directly with indicators, recorders, DCS, PLC, and PC-based SCADA systems.

For more information, go to Problem Solvers Application Ideas.

Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded from Adobe's Web site.

Featured Interface Solutions
Unit
Input
 Output
 Power
 Mounting
 Features

IPT2 DIN-Style Current-to-Pressure Transmitter


Get Product Information and Installation Tools
 Switch Selectable on 4-20mA
4-12mA
12-20mA
 0-20psig
3-15psig
3-16.6psig
3-18psig
1-17psig
6-30psig
3-27psig
0.2-1Bar
20-100kPa
0.2-1KGCM2
0.02-0.10MPA

Reverse Outputs
20-0psig
15-3psig
16.6-3psig
18-3psig
17-1psig
30-6psig
27-3psig
1-0.2Bar
100-20kPa
1-0.2KGCM2

Special Ranges

25-35psi
1.4Bar
140kPa
1.4KGCM2
.14MPA
 High-Density and RFI Resistant
Aluminum DIN-style
(G-type and Top Hat rails; multi-unit racks)

Compact DIN-rail mounting

Wide variety of output and air supply choices

Multi-unit racks simplify and speed installation

Closed loop design means quick response times

Low air consumption, high output volume

Immune to supply pressure variations

Design prevents clogging and sticking on start
Unit 
 Input
 Output
 Power
 Mounting
 Features

IPH2 Field-Mount Current-to-Pressure Transmitter


Get Product Information and Installation Tools
 4-20mA
4-12mA
12-20mA
 0-20psig
3-15psig
3-16.6psig
3-18psig
1-17psig
6-30psig
3-27psig
0.2-1Bar
20-100kPa
0.2-1KGCM2
0.02-0.10MPA

Reverse Outputs
20-0psig
15-3psig
16.6-3psig
18-3psig
17-1psig
30-6psig
27-3psig
1-0.2Bar
100-20kPa
1-0.2KGCM2

Special Ranges

25-35psi
1.4Bar
140kPa
1.4KGCM2
.14MPA
 Watertight, Dust Tight, and Corrosion Resistant
Aluminum
NEMA 4X (IP66)
(pipe and surface)

Economical field mounting

Wide variety of output and air supply choices

Closed loop design means quick response times

Low air consumption, high output volume

Immune to supply pressure variations

Design prevents clogging and sticking on start

Why Wait? Pull the Trigger NOW! The BULLET® WirelessHART® Adapter by MACTek, and supplied by Moore Industries, enables new and existing wired smart HART field devices, non-smart analog field devices (i.e., 4-20mA) and remote HART I/O from any supplier to communicate with host applications using WirelessHART Technology.

Use The BULLET to convert information, such as valve position, from smart HART and non-smart analog valve positioner back to a host control system. We also offer complete wireless packages that include one or more multiple instruments, an enclosure and the BULLET. 

Get Data Sheet (PDF, 863K)
Unit 
 Input
 Output
 Power
 Mounting
 Features

IPX2 Explosion-Proof, Field-Mount Current-to-Pressure Transmitter


Get Product Information and Installation Tools
 4-20mA
4-12mA
12-20mA
 0-20psig
3-15psig
3-16.6psig
3-18psig
1-17psig
6-30psig
3-27psig
0.2-1Bar
20-100kPa
0.2-1KGCM2
0.02-0.10MPA

Reverse Outputs
20-0psig
15-3psig
16.6-3psig
18-3psig
17-1psig
30-6psig
27-3psig
1-0.2Bar
100-20kPa
1-0.2KGCM2

Special Ranges

25-35psi
1.4Bar
140kPa
1.4KGCM2
.14MPA
 Rugged and Explosion-Proof
NEMA 4X (IP66) and NEMA 7
(pipe and surface)

Extensive hazardous area approvals

Uses air or natural gas as pneumatic supply

Wide variety of output and air supply choices

Closed loop design means quick response times

Low air consumption, high output volume

Immune to supply pressure variations

Design prevents clogging and sticking on start
Unit 
 Input
 Output
 Power
 Mounting
 Features

IPF Field-Mounted Current-to-Pressure Transmitter


Get Product Information and Installation Tools
 4-20mA
 3-15psig
3-27psig
0.2-1Bar
1-0.2Bar
3-16.6psig
20-100kPa

Reverse Output
15-3psig
100-20kPa

20psi
35psi
1.4Bar
140kPa
 Watertight, Dust Tight, and Corrosion Resistant
Thermoplastic
NEMA 4X (IP55)
(pipe and surface)

Water-tight, dust–tight and corrosion-resistant housing

Resistant to vibration
Unit 
 Input
 Output
 Power
 Mounting
 Features

PIT, PIF, and PIX Pressure-to-Current Transmitters


Get Product Information and Installation Tools

PIT

PIX

 3-15psig
3-27psig
0.2-1Bar
20-100kPa
0.2-1KGCM2

Special Ranges
 4-20mA
10-50mA

2-Wire,
Loop-Powered
12-24Vdc
12-28Vdc
12-30Vdc
12-42Vdc

Line-Powered
117Vac
220Vac
240Vac
 High-Density and RFI Resistant
Aluminum

DIN-Style
(G-type and Top Hat rails)

Field-Mount
Hockey-Puck
(head, pipe, explosion-proof, surface, and relay-track)

Watertight, Dust Tight, and Corrosion Resistant
Thermoplastic
NEMA 4X (IP55)
(pipe and surface) 

Control room and field mount options

Extensive hazardous area approvals

Immune to shock, vibration and position

No moving parts to wear out or adjust
Unit 
 Input
 Output
 Power
 Mounting
 Features

PIH Field-Mount Pressure-to-Current Transmitter


Get Product Information and Installation Tools
 0-15psig
3-15psig
3-27psig
6-30psig
0.2-1Bar
20-100kPa
20-186kPa
0.2-1KGCM2

Special Ranges
 4-20mA
Reverse Outputs

2-Wire, Loop-Powered
12-42Vdc
 Watertight, Dust Tight, and Corrosion Resistant
Aluminum
(pipe and surface)

Economical field mounting

Immune to shock, vibration and position

No moving parts to wear out or adjust

Reverse output option

Complementary Pneumatic Products and Accessories


Instrument Air Filters
Our air filters eliminate problems in pneumatic instruments caused by oil, condensible liquids and particulates that are often present in process plant instrument air supplies. Available filters are designed for use with a wide range of pneumatic instruments, including our IPT, IPF, and IPX Current-to-Pressure Transmitters.