Moore Industries Acquires Powers Process Controls Instrument Division!
Moore Industries has enhanced our line of process controllers through the acquisition of Powers Process Controls Instrument Division (Skokie, IL), a unit of Crane Corporation. This includes Powers' family of process controllers, process monitors and indicators, and DCS, PLC and Backup Stations for critical applications. More Information.

Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded free from Adobe's Web site.

Featured Interface Solutions
Model	Description
330R 1/8 DIN Process Monitor and Indicator Get Data Sheet 330r.pdf (181K )	The universal Model 330R 1/8 DIN Process Monitor and Indicator programs to accept a signal input from a process instrument or temperature sensor, and shows real-time process status on its large process display. The economical Model 330R Process Controllers are available with alarm trip outputs that can be used for on/off control or to warn of unwanted high/low process conditions. Models are also available with an analog output signal (proportional to input) for retransmission to an analog control system, and with RS-485 communications for interface with digital-communicating DCS, PLC and PC-based SCADA systems. Major Features of these Process Controllers Universal input (mA, mV, V, RTD, Thermocouple) Quick setup of process controllers with menu prompts and large back-lit keys NEMA 4X front panel with extra-bright 4-digit display Single or dual alarm trip outputs Isolated analog output for process controllers (4-20mA or 0-20mA) Optional RS-485 digital communications
535 1/4 DIN Single Loop PID Process Controllers Get Data Sheet 535.pdf (2.0M )	These multifunction Model 535 1/4 DIN Single Loop Process Controllers provide PID control of any analog process variable (temperature, pressure, level and flow) in batch and continuous process applications. Available models of the 535 Process Controllers provide a proportional analog control signal output that is typically used to regulate a control valve or similar final control element. Also available, are process controller models with alarm trip outputs for on/off control or to warn of unwanted high/low conditions, and with RS-485 communications for interface with digital-communicating DCS, PLC, and PC-based SCADA systems. When ordered with the Profile Controller option, the 535 Process Controllers provide full ramp and soak capability with 20 recipes and 24 segments per recipe; guaranteed soak with adjustable hysteresis; three event output capability; and a ramp that can be programmed to take place over a specific amount of time or to be based on PV rate of change per hour. 535 Process Controllers offer advanced tuning features which allow you to bring the process under control faster, more accurately and far more easily than competitive single-loop controller, PLC and PC-based strategies. Its autotune capability constantly analyzes your process and makes modifications to the tuning parameters to ensure precise, long-term, stable control. Major Features of these Process Controllers: Universal input (mA, mV, V, RTD or Thermocouple) Isolated analog outputs for process controllers (4-20mA or 0-20mA) Alarm trip outputs (control, high/low, deviation and rate of change) PowerTune delivers pretuning, adaptive tuning and powerback anti-overshoot Quick setup of process controllers with plain-English menu prompts and large back-lit keys NEMA 4X front panel with extra-bright 2-line, 5-digit PV display RS-485 digital communications Dual Loop Process Controllers, Too! Model 545 1/4 DIN Dual Loop PID Process Controllers — To save the cost of purchasing and installing two separate PID devices, these process controllers incorporate two independent full-feature control loops. These process controllers also provide all of the features and advantages of our Model 535 Process Controllers and additionally, offer a selection of preprogrammed compound loop control strategies. Get Data Sheet 545.pdf (514K )
Other Available Process Controllers and Backup Stations Model 531 1/4 DIN PLC, DCS, PC Process Controllers Backup Station These process controllers provide "bumpless " automatic PID control backup for critical loops controlled by PLC, DCS or PC-based systems by automatically taking control of the loop should the host control signal be lost. Get Data Sheet 531.pdf (157K ) Model 532 1/4 DIN Auto/Manual Backup Station To provide manual backup of critical control loops upon sensing loss of host (PLC, DCS or PC) control signal, these process controllers generate a control signal based on a predetermined control value (CV) or the last known CV from the host. The manual signal can be user-modified from the front-panel keypad. Get Data Sheet 532.pdf (174K ) Model 555 1/4 DIN Chlorination/Dechlorination Process Controllers For automatic and accurate control of chlorine in water and wastewater applications, these process controllers set up to handle flow proportional control, residual control, compound loop control with lag times, and dechlorination with sulfur dioxide. Simultaneously displaying both flow rate and residual chlorine, these process controllers quickly integrate with flow transmitters and residual analyzers. Get Data Sheet 555.pdf (279K )