Product Information

Convert, isolate, split, boost, and step down process signals so field instruments can interface directly with indicators, recorders, DCS, PLC, and PC-based SCADA systems.

For more information, go to Problem Solvers Application Ideas.

NEW! Interactive White Paper

What can signal conditioners can do for you? Find out by reading this informative Interactive White Paper Signal Isolators, Converters and Interfaces: The "Ins" and "Outs" ( 1.1M )

Detailed product data sheets are available in PDF format by clicking on the product names below. PDF files require Adobe Reader, which can be downloaded from Adobe's Web site.

Featured Interface Solutions
Unit
 Input
 Output
 Power
 Mounting
 Features

ECT-DIN 2- and 4-Wire Signal Isolators, Converters, Repeaters, and Splitters


Get Product Information and Installation Tools
 4-20mA
1-5Vdc
0-150Vac
0-5Aac
 4-20mA
Dual Output Channels for Signal Splitting

2-Wire,
Output Loop-Powered
(10-42Vdc)

2-Wire,
Input Loop-Powered
(5.5 volts loop-powered)

4-Wire,
Line-Powered
(24Vdc, 117Vac, or 230Vac)
 High-Density and RFI Resistant
Aluminum DIN-style
(G-type and Top Hat rails)

Our most popular signal conditioner family

Fixed input and output types

1- and 2-channel configurations

Single input with dual outputs for signal splitting

Powers a 2-wire transmitter (transmitter excitation)
Unit 
 Input
 Output
 Power
 Mounting
 Features

MIX and MIT miniMoore 2-Wire and 4-Wire Multi-Channel Signal Isolators and Converters


Get Product Information and Installation Tools
Switch Selectable on 2-Channel Models
4-20mA
0-5V
1-5V
0-10V

Fixed 4-20mA input/4-20mA Output on 4-Channel MIX Models

 Two (MIX & MIT) 4-20mA or Four (MIX) 4-20mA Channels 

 Model MIX: 2-Wire,
Output Loop-Powered
(12-42DC)

Model MIT: 4-Wire,
Line/Mains-Powered
(Universal for any range between 20-375Vdc or 90-264Vac) 

 High-Density and RFI Resistant
Aluminum DIN-style
(G-type and Top Hat rails)

Lowest cost per channel signal conditioners

Switch-selectable current/voltage input types

2- and 4-channel configurations

High Density 6.35mm (0.25 inch) per channel footprint

Multi-channel signal splitter

Universal AC/DC Power Input (4-wire model)

Why Wait? Pull the Trigger NOW! The BULLET® WirelessHART® Adapter by MACTek, and supplied by Moore Industries, enables new and existing wired smart HART field devices, non-smart analog field devices (i.e., 4-20mA) and remote HART I/O from any supplier to communicate with host applications using WirelessHART Technology.

Use The BULLET with our complete lines of 2- and 4-wire signal transmitters, isolators and converters. We also offer complete wireless packages that include one or more multiple instruments, an enclosure and the BULLET.

Get Data Sheet (PDF, 863K)
Unit 
 Input
 Output
 Power
 Mounting
 Features

SIY 2-Wire PC-
Programmable Signal Isolator and Converter


Get Product Information and Installation Tools

Sets Up in One Minute, From One Software Window

Current
Any range from
-2.5 to 55mA including:
0-20mA
4-20mA

10-50mA

Voltage
Any range from
-0.5 to 11V including:
1-5Vdc
0-10Vdc
 4-20mA

2-Wire,
Output Loop-Powered
 (10-42Vdc)
 High-Density and RFI Resistant
Aluminum DIN-style
(G-type and Top Hat rails)

Field Mount
Hockey-Puck
(head, pipe, relay-track, surface, and explosion-proof)

Our most versatile 2-wire signal conditioner

PC-programmable with FREE software and cable

Trim input readings and program output damping

Create 85-point custom linearization curves

Download a setup to multiple isolators
Unit 
 Input
 Output
 Power
 Mounting
 Features

CPT 4-Wire PC-
Programmable Signal Isolator and Converter


Get Product Information and Installation Tools

Sets Up in One Minute, From One Software Window

Current
Any range from 0 to 50mA including:
0-20mA
4-20mA
10-50mA

Voltage
Any range from 0 to 10Vdc including:
1-5Vdc
0-10Vdc

Sensor (RTD and T/C) inputs are also available. See the data sheet for details.

Sets Up in One Minute, From One Software Window

Current
Any range from 0 to 20mA including:
 0-20mA

4-20mA

Voltage
Any range from 0 to 10Vdc including:
1-5Vdc

0-10Vdc

Optional Relay Output Warns of Unwanted Process Conditions
High/Low Alarms
(Failsafe or Non-Failsafe)

4-Wire,
Line-Powered
(24Vdc, 117Vac, or 230Vac)

High-Density and RFI Resistant
Aluminum DIN-style (G-type and Top Hat rails)

Our most versatile 4-wire signal conditioner

PC-programmable with FREE software and cable

Trim input readings and program output damping

Create 85-point custom linearization curves

Download a setup to multiple isolators
Unit 
 Input
 Output
 Power
 Mounting
 Features

HIT and HIX 2- and 4-Wire HART® Isolators


Get Product Information and Installation Tools
 4-20mA
input with superimposed HART digital protocol signal
 Isolates Loop, Lets HART Digital Signal "Pass Through"
4-20mA
output with superimposed HART digital protocol signal

 

 HIT 4-Wire Line-Powered
(24Vdc, 117Vac, 230Vac)

HIX 2-Wire Loop-Powered
(12-42DC)
 Thermoplastic DIN-style
(G-type and Top Hat rails) 		Isolates the analog loop, and lets the HART digital signal “pass through” unaffected
Unit 
 Input
 Output
 Power
 Mounting
 Features

SIX 2-Wire Signal Isolator, Converter, and Repeater


Get Product Information and Installation Tools

0-20mA
4-20mA
10-50mA
0-1mA
-1 to +1mA
-10 to +1-Vdc
0.2-1Vdc
0-1Vdc
0-5Vdc
1-5Vdc
0-10Vdc
0-30Vdc

 4-20mA
10-50mA

2-Wire,
Output Loop-Powered
(12-42Vdc)

High-Density and RFI Resistant
Aluminum DIN-style (G-type and Top Hat rails)

Fixed inputs and outputs

Non-standard input types available
Unit 
 Input
 Output
 Power
 Mounting
 Features

FCT 4-Wire Field-Configurable Signal Isolator and Converter


Get Product Information and Installation Tools
 Field Configurable
0-20mA
4-20mA
0-50mA
10-50mA
0-5Vdc
1-5Vdc

0-10Vdc

Special Ranges 		Field Configurable with Jumpers
0-20mA
4-20mA
0-5Vdc
1-5Vdc
0-10Vdc


Special Ranges

 Takes any Power Supply
4-Wire, Universal Line-Powered
(accepts 22-300Vdc or 90-260Vac)

High-Density and RFI Resistant
Aluminum DIN-style (G-type and Top Hat rails)

Jumper-selectable input and output

Non-standard current/voltage inputs and outputs

Universal AC/DC power input

Powers a 2-wire transmitter (transmitter excitation)
Unit 
 Input
 Output
 Power
 Mounting
 Features

FDY 2-Wire PC-
Programmable Frequency-to-DC Transmitter with Display


Get Product Information and Installation Tools
 Sets Up in One Minute, From One Software Window

Frequency
0.005Hz to 25KHz Ranges

Periods
40 microseconds to 200 seconds

Pulse Widths
0.2 milliseconds to 200 seconds
 User-Configurable Display Shows Any Engineering Unit
4-20mA

 

 2-Wire, Output Loop-Powered (12-42DC)
 Field-Mount
Hockey-Puck
(head, pipe, relay-track, surface, and explosion-proof)

Versatile input choices

PC-programmable with FREE software and cable

Customizable display shows process status/diagnostics

Programmable moving average filter

Additional Signal Transmitters, Isolators and Converters:

ACX 2-Wire AC Current Isolator and Transmitter
SCX 2-Wire Signal Isolator and Converter
SDY 2-Wire PC Programmable Signal Isolator and Converter with Display
TMZ 4-Wire PC-Programmable MODBUS Signal Transmitter